The QSS-3501i PLUS, QSS-3501 PLUS, and QSS-3502 PLUS,are innovative additions
to the highly popular QSS-35 series. The new QSS-3501i/3501/3502 PLUS is
a user-friendly, efficient, cost-effective minilab system that combines
the same basic features as the QSS-35 series with even more features that
meet a wide variety of customer needs, such as the ability to form a network
connecting multiple printers, and a versatile layout in which the operation
section (PC, monitor, scanner etc.) can be separated from the printer.
High quality
print engines
Noritsu Koki's laser engine is used for the QSS-3501/3502 PLUS and
an iBeam engine is used for the QSS-3501i PLUS. Both produce vivid,
high quality prints of 300dpi. |
 |
Flexible layout
| You can choose which side to operate the machine from, and the components
can be separated and placed in various layouts, giving you more freedom
to use the system in a way that best fits your available floor space.
Furthermore you can also adjust the height by raising the table up
to 20cm. |
 |
“AccuSmart™” image processing
technology employed
Noritsu AccuSmart technology enables you to easily portray the natural beauty
of the scene as viewed by the photographer when the picture is taken. This
advanced technology not only provides superb quality for well photographed
images, it also applies appropriate correction to less-than-perfect shots,
resulting in extremely high quality prints regardless of the image source.
A selection of new film scanners
to choose from (film scanners sold separately)
With the QSS-35 PLUS series, you have three new film scanners to choose
from. The HS-1800 supports a wide variety of film including 120, and the
LS-600/LS-1100 support only 135 and IX240 film. You can also choose not
to add a scanner, and instead use the QSS-3501i/3501/3502 PLUS as a stand-alone
printer.
New operation software “EZ Controller”
(sold separately)
| The EZ Controller gives you the ability to easily perform many important
functions such as PJP, value-added print creation, order management,
and image correction. Furthermore, pictures are used to explain many
of the instructions for start up checks and shut down checks, and
warning messages are easy to locate and read. |
 |
Setup prints taken care of automatically
| The colorimeter is built into the processor. This enables the setup
print to be automatically inserted into the colorimeter after it comes
out of the dryer unit, eliminating the need for manual operations.
Also, the QSS-35 PLUS series has a new option called the “Control
Strip Auto Loading Unit” that automatically processes control
strips. |
 |
Interrupted orders signified by LED lamp
LED lamps on the order sorter (Standard for QSS-3502 PLUS. Option for
QSS-3501i/3501 PLUS.) are used to indicate which orders have been interrupted
and which print trays the interrupted orders are in.
Rapid processing
When purchasing a QSS-35 PLUS minilab you can specify a rapid processing
system which uses specified chemicals to achieve a reduced processing
time, opening the door for an on-the-spot print service where the customers
can drop off their media and pick up their prints a single visit. Note:
Only specified chemicals and paper can be used.
Prints up to 914.4mm (36 inches) long
The standard maximum paper advance length is 610mm, and this can be extended
to 914.4mm if you add an option, making it possible to provide a wide
variety of print services.
QSS-3501/3502PLUS only
Dual/Triple Magazines (Factory option)
The dual and triple magazine systems enable labs that make various size
prints to set multiple paper sizes at the same time. Magazine changes
are quick and easy.
An array of options
The QSS-35 PLUS series supports the MD-2 Unit, Bravo II/Rimage CD writers,
DVD writing and many other options to provide a scalable system that allows
you to add new services as needed.
Can be converted into a one pass system (Optional
attachment units required)
The film processor (QSF-T15) and the scanner (LS-600/LS-1100) can be combined
into a single unit enabling the film to be automatically fed into the
scanner as it comes out of the processor. This all-in-one configuration
automates the entire process from 135 film development to printing, enabling
unattended operation.
NoteOne pass processing is only possible with 135 film.
Specifications:
| Film Formats |
LS-600/1100 . 135,
IX240 HS-1800 135, IX240, 110, 120, 220 |
| Film Types |
Negative, Positive, Black and White |
| Print Size |
Paper width
|
82.5 to 210mm (up to 203mm for QSS-3501i
PLUS) |
Paper advance length
|
82.5 to 610mm
(An option can be added to the QSS-3501/3502 PLUS to increase the
maximum paper advance length to 914.4mm) |
| Compatible input media |
Standard |
FD, CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R,
DVD+R, DVD-RW, DVD+RW, DVD-RAM |
| Option |
CompactFlash, SmartMedia,
SD Card, Memory Stick, xD-Picture, etc |
Compatible output
media |
Standard |
FD |
| Option |
CD-R, CD-RW, CompactFlash,
SmartMedia, SD Card, Memory Stick, Microdrive, xD-Picture, DVD-R,
DVD-RW, DVD-RAM, etc |
(Approximate) Processing
capacity (prints/hr)
|
135 negative
/ positive (24exp)
No panoramas intermixed.
With index prints. |
Print size |
Scanner |
Noritsu 3501i PLUS
|
Noritsu 3501 PLUS
|
Noritsu 3502 PLUS
|
W89
X 127mm
|
LS-600 |
600 |
600 |
600 |
LS-1100 |
630 |
670 |
1,110 |
HS-1800 |
630 |
670 |
1,200 |
W102
X 152mm |
LS-600 |
530 |
580 |
600 |
LS-1100 |
530 |
580 |
1,040 |
HS-1800 |
530 |
580 |
1,040 |
Digital camera
(6 megapixels)
With digital camera correction. |
W127
X 89mm
(QSS-3502PLUS: W89 X 127mm)
|
|
910 |
1,200 |
W152
X 102mm
(QSS-3502PLUS: 102 X 152mm) |
760 |
810 |
1,040 |
Capacity calculated according to our criteria. The actual capacity you achieve
may be different.
|
